Warthog WT-3/8-C Sewer Nozzle | Wagga Wagga Riverina NSW
Warthog Sewer Nozzles

Warthog® WT-3/8-C™ Sewer Nozzle

Our smaller Warthog® sewer models have all the powerful features of the larger tools, but can negotiate elbows and clean-outs commonly found in laterals from homes, buildings, restaurants and other light commercial facilities. The WT-3/8-C™ is designed specifically to handle 75mm - 150mm lines and clean-outs. This tool is most commonly used an small capacity pumps and cart jetters.

We’ve added permanent carbide buttons to the WT-3/8-C™ model, specifically designed to handle demanding applications. Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Our carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT-3/8™ models.

The WT-3/8-C™ features a 3/8 npt or BSPP inlet port.

  • Up to 275 bar
  • Flows 20-45 L/Min
  • Lines 76-152mm
  • Classic Workhorse Model

Maximum Pressure

Operating Pressure

Rotation Speed


Flow Rating

275 bar

100-275 bar


20-45 L/Min

0.75 Cv

Pulling Force

Inlet Port

Tool Diameter


Nozzle Ports

Weight Complete

22-90 Nm

1/4 NPT or BSPP



3 x 1/8 NPT

.54 kg

Please note: Due to ongoing developments specifications may change.

Warthog WT-3/8-C Sewer Nozzle

Enquire Now


Contact Information

For further details or a quote please contact:
Malcolm Irvin       0428 212 011
Chris Smith           0428 850 860