20L Chiefs Extreme Wash
Chiefs Extreme Wash is a powerful high pH (alkaline) cleaner. It is suitable for the removal of heavy road grime and contaminants from trucks, earthmoving gear, and agricultural equipment.
This product is safe on all paints, stainless-steel and chrome. Do not use on polished aluminium as this product may leave a white veil or streak the aluminium. Care should be taken if using on ceramic coating. Please refer to the vehicle manufacturer’s guidelines BEFORE applying the product. It is recommended that you test all products on a small inconspicuous area before use.
Dilution and Usage:
Via Suttner Downstream Injectors ST-160/ST-167/ST-164: Dousing restrictor 0.7 (1%) to 1.0 (2.5%)
Via Suttner ST-73 Foam Lance: Use undiluted (neat) soap on Setting 1 (2–2.5%)
Via other foam lances: The dilution should be estimated to output a foam concentration of 2–2.5%—the required dilution will vary between brands. As a guide, dilute 200ml product into 800ml water (1:4 dilution ratio) in the foamer bottle and set the lance regulator to the full minus position.
Application Instructions:
Apply a single, thick layer of foam over a cool, dry vehicle and allow to dwell for around 1 minute. Using high-pressure water, start cleaning from the bottom to the top with horizontal sweeping motions; or sweep vertically and move backward along the vehicle. Apply the water into the fresh soap, covering all areas. High-pressure rinse all excess soap from the top to the bottom.
HIGH PRESSURE FOAMERS
Please note: Due to ongoing developments specifications may change.
