Pilot TFD72 Refrigerated Dryer System | Wagga Wagga Riverina NSW
Pilot Air Logo
Pilot Tough - Built to Last

Pilot TFD72 Refrigerated Dryer System

The Pilot TFD72 Refrigerated Compressed Air Dryer System is rated for Australian conditions with a flow rate based on an ambient temperature of 35°c. It offers a cost-effective air treatment solution, with reduced downtime, lower equipment maintenance costs and improved product finish.

Fitted with the efficient ALU-DRY heat exchanger, high-efficiency compressors, hot gas bypass valve and low-pressure drop, the system also offers reduced energy consumption.

  • Upgraded electronic control panel
  • Hot gas bypass valve
  • Condensate drain
  • 240V power supply

Model

Flow Rate

Power Supply

Port Sizes (In/Out)

Width

Depth

Height

Weight

TFD 72

119.9 L/Sec

254 CFM

240 Voltage

11/2" BSP F

354mm

776mm

987mm

67 kg

  • Technical data conforms to +/- 5%. Pilot Air reserves the right to modification without notice for design and technical improvements.
  • Warranty: 12 months on all products listed.
  • A 3 micron Pre-Filter is required to be fitted in the compressed Air System prior to the dryer to ensure product warranty
  • For over 40 years Pilot Air Compressors has been meeting the needs of industry. Ask us about your requirements.

Data refers to the following condition: Ambient temperature of 35°c, with inlet air at 7 bar and 45°c. Pressure dew point as per Class 5-ISO Standard 8573.1.

                                           

Maximum working conditions: Ambient temperature of 50°c, inlet air temperature 70°c and inlet pressure 14 bar (16 bar TFD 6-22).

The Pilot TFD 72 Refrigerated Compressed Air Dryer System operation is monitored by a digital thermometer in the control panel. The innovative new hot gas bypass valve incorporates greater precision and accuracy, preventing the formation of ice inside the evaporator under any load condition. Set during final testing, the valve requires no further adjustments.

All models are also fitted with a timed electronic drain, which allows for the adjustment of discharge and pause times. The generous sizing of the condenser ensures maximum performance of the refrigerant circuit and the ability to operate with changes in conditions, while also offering easy access for cleaning and maintenance.


Please note: Due to ongoing developments specifications may change.


RELATED PRODUCTS



Contact Information

For further details or a quote please contact:
Malcolm Irvin       0428 212 011
Chris Smith           0428 850 860