I-600 Industrial Dynamometer | Wagga Wagga Riverina NSW

The mid-range industrial diesel engine & electric motor dyno in this series. 
AW I-600 Industrial Dynamometer

AW I-600 Industrial Dynamometer

Universal Industrial Diesel Engine Electric Motor

The AW I-600 Dynamometer is a mid range industrial diesel engine / electric motor dyno. Capabilities of testing up to 600hp & 2100 ft/lbs of torque.

This unit has a wet prony brake style power absorption unit, hydraulically activated & water cooled.


  • The I-600 can to test engines up to 600hp (450 kW) @ 3600 rpm, with a maximum torque rating of 2100 ft/lbs (2851 Nm). With max torque at 0-1000 rpm, the versatile dynamometer can check torque rise or lugging ability of high torque/low RPM engines or motors.
  • Fitted with a balanced high speed driveline kit. A universal adaptor for diesel or Timesaver adaptor for electric.
  • Protection is built-in against harmonic vibration, torque overload and thermal overload.
  • Bi-rotational - can test either rotation
  • DynoPro 2100S computer & printer (see below)
  • Calibration is an easy one man operation done on site (no need to send away)
  • Unit is portable & on wheels - weighing 585 kg after draining water ballast (300 litre water ballast also used as cooling reserve). Floor or rail mounted optional.
  • The I-600 can test diesel engines, electric motors, gear boxes, transmissions and other high torque/low RPM applications. Other options permit custom-tailoring of the I-600 to your application. In addition, the I-600 can be factory equipped to test unusually high torque/low RPM equipment.
  • No noise, the only sound you will hear is that of the engine being tested!

Power Ratings

Max Speed

3600 RPM

900 RPM

32 - 350 HP

24 - 260 kW

1200 RPM

35 - 400 HP

24 - 300 kW

1800 RPM

65 - 450 HP

40 - 335 kW

3600 RPM

150 - 600 HP

110 - 450 kW

Max Torque

2100 ft/lb

2800 Nm

(Note: Minimum ratings relate to an estimate of water drag on drums)

Power Chart

AW I-600 Industrial Dynamometer Power Chart

(Click Image to enlarge)

Torque Chart

AW I-600 Industrial Dynamometer Torque Chart

(Click Image to enlarge)

NEW DynoPro 2100S Computer & Printer

Displays power, torque and torque rise with easy calibration 
Displays imperial (hp ft/lbs) or metric (kW Nm) through a simple touch menu setup.

ETS software for external computer such as laptop available.

DynoPro 2100S Computer & Printer
AW Print Report

Sample Print Report 

RTX Remote & Smart Load (Optional)

DynoPro 2100S Computer & Printer

Auto adjust for constant RPM
Torque Set-Point ability 

(Set on 1000 rpm, stays on 1000 rpm) 
Real time data display.
Operate the dyno from tractor cab!

AW Engine Test System (ETS)

AW Engine Test System (ETS)

Computer software that enables reports,
graphs and full test data.

Connects directly from dyno's digital display to an external PC ( i.e. laptop)

Engine Stand

Engine Stand

Engine Stand with 
bell housing mount or pad mount 
(4000 kg capacity).

Electric Motor Testing Package

AW Dynamometer Electric Motor Testing Package
  • Motor test table - mobile & adjustable height - suit up to 450mm frame size.
  • Special Dyno Floor mount kit - set up to attach test table.
  • Constant Torque Kit - to 0 rpm for locked rotor test or very low rpm testing, eg: tranmissions.
  • CLControl - set point torque or rpm operated from hand held control (6m lead).

Engine Cooling Manifold

AW Dynamometer Engine Cooling Manifold

Engine Cooling Manifold uses the pre-heated water from dyno or external source in replace of radiator.

Valuable information for your Industrial Dynamometer

Cooling Requirements Guide

Please note: Due to ongoing developments specifications may change.

A.M.D.S. has full Technical Info, Parts & Service backup ensuring AW owners receive the service they deserve.
A.M.D.S. is the distributor for the Australia - New Zealand region.

AW I-600 Industrial Dynamometer

Enquire Now

Contact Information

For further details or a quote please contact 
Chris Smith     0428 850 860