I-300 Industrial Dynamometer | Wagga Wagga Riverina NSW

The smaller industrial diesel engine & electric motor dyno in this series. 
AW I-300 Industrial Dynamometer

AW I-300 Industrial Dynamometer

Universal Industrial Diesel Engine Electric Motor

The AW I-300 Dynamometer is the smaller industrial diesel engine / electric motor dyno in this series. Capabilities of testing up to 300hp & 1050 ft/lbs of torque.

This unit has a wet prony brake style power absorption unit, hydraulically activated & water cooled.


  • The I-300 can to test engines up to 300hp (225 kW) @ 3600 rpm, with a maximum torque rating of 1050 ft/lbs (1425 Nm). With max torque at 0-1000 rpm, the versatile dynamometer can check torque rise and lugging ability of high torque/low RPM engines or motors.
  • Fitted with a balanced high speed driveline kit. A universal adaptor for diesel or Timesaver adaptor for electric.
  • Protection is built-in against harmonic vibration, torque overload and thermal overload.
  • Bi-rotational - can test either rotation
  • DynoPro 2100S computer & printer (see below)
  • Calibration is an easy one man operation done on site (no need to send away)
  • Unit is portable & on wheels - can easily be floor or rail mounted.
  • The I-300 can test diesel engines, electric motors, gear boxes, transmissions and other high torque/low RPM applications. Other options permit custom-tailoring of the I-300 to your application. In addition, the I-300 can be factory equipped to test unusually high torque/low RPM equipment.
  • No noise, the only sound you will hear is that of the engine being tested!

Power Ratings

Max Speed

3600 RPM

900 RPM

20 - 175 HP

15 - 130 kW

1200 RPM

25 - 200 HP

18 - 150 kW

1800 RPM

40 - 225 HP

30 - 167 kW

3600 RPM

75 - 300 HP

56 - 225 kW

Max Torque

1050 ft/lb

1400 Nm

(Note: Minimum ratings relate to an estimate of water drag on drums)

Power Chart

AW I-300 Industrial Dynamometer Power Chart

(Click Image to enlarge)

Torque Chart

AW I-300 Industrial Dynamometer Torque Chart

(Click Image to enlarge)

NEW DynoPro 2100S Computer & Printer

Displays power, torque and torque rise with easy calibration 
Displays imperial (hp ft/lbs) or metric (kW Nm) through a simple touch menu setup.

ETS software for external computer such as laptop available.

DynoPro 2100S Computer & Printer
AW Print Report

Sample Print Report 

RTX Remote & Smart Load (Optional)

RTX Remote & Smart Load

Auto adjust for constant RPM
Torque Set-Point ability 

(Set on 1000 rpm, stays on 1000 rpm) 
Real time data display.
Operate the dyno from tractor cab!

AW Engine Test System (ETS)

AW Engine Test System (ETS)

Computer software that enables reports,
graphs and full test data.

Connects directly from dyno's digital display to an external PC ( i.e. laptop)

Engine Stand

Engine Stand

Engine Stand with 
bell housing mount or pad mount 
(4000 kg capacity).

Electric Motor Testing Package

Electronic Motor Testing Package
  • Motor test table - mobile & adjustable height - suit up to 450mm frame size.
  • Special Dyno Floor mount kit - set up to attach test table.
  • Constant Torque Kit - to 0 rpm for locked rotor test or very low rpm testing, eg: tranmissions.
  • CLControl - set point torque or rpm operated from hand held control (6m lead).

Engine Cooling Manifold

Dynamometer Engine Cooling Manifold

Engine Cooling Manifold uses the pre-heated water from dyno or external source in replace of radiator.

Valuable information for your Industrial Dynamometer

Cooling Requirements Guide

Please note: Due to ongoing developments specifications may change.

A.M.D.S. has full Technical Info, Parts & Service backup ensuring AW owners receive the service they deserve.
A.M.D.S. is the distributor for the Australia - New Zealand region.

AW I-300 Industrial Dynamometer

Enquire Now

Contact Information

For further details or a quote please contact 
Chris Smith     0428 850 860