5L Chiefs Platinum Wash
Chiefs Platinum Wash was designed to touchlessly clean vehicles that have polished aluminium tanks, bull bars, roll bars, side steps and rims, without streaking the aluminium.
All Chiefs Australia soaps are applied through a high pressure foam lance and need to be applied between 80 and 100:1 water to soap.
Mixing Ratio – 4:1 as a general rule or in a 1 litre foaming bottle. 200ml Platinum Wash and 800 ml water.
Setting 1 on a Suttner foam lance with no dilution. This can be adjusted however, dependant on the amount of contamination.
Cleaning – foam from the bottom to the top. Allow to dwell for around 1 minute.
Using preferably a 25 degree nozzle, start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom)
Rinsing – rinse any excess soap from the top to the bottom.
IT IS RECOMMENDED TESTING PRODUCT ON A SMALL INCONSPICUOUS AREA BEFORE USE.
Please note: Due to ongoing developments specifications may change.
For further details or a quote please contact:
Malcolm Irvin 0428 212 011