All Chiefs Australia soaps are applied through a high pressure foam lance and need to be applied between 80 and 100:1 water to soap.

Mixing Ratio – 4:1 as a general rule or in a 1 litre foaming bottle. 200ml Platinum Wash and 800 ml water.

Setting 1 on a Suttner foam lance with no dilution. This can be adjusted however, dependant on the amount of contamination.

Cleaning – foam from the bottom to the top. Allow to dwell for around 1 minute.

Using preferably a 25 degree nozzle, start cleaning from the bottom to the top covering all areas (always clean into fresh soap using the high pressure water as a water broom)

Rinsing – rinse any excess soap from the top to the bottom.

IT IS RECOMMENDED TESTING PRODUCT ON A SMALL INCONSPICUOUS AREA BEFORE USE.