Every year, more buyers choose the high torque, high horsepower AW dynamometer


AW Distributors, Parts & Service
 
AW I-600 Dynamometer
Universal Industrial Diesel Engine Electric Motor Dyno
I-900 pictured

The AW I-600 Dynamometer is a mid range industrial diesel engine / electric motor dyno. Capabilities of testing up to 600hp & 2100 ft/lbs of torque.  This unit has a wet prony brake style power absorption unit, hydraulically activated & water cooled.
                             I-600  
I-900 pictured
I-600 similar

Features

a The I-600 can to test engines up to 600hp (450 kW) @ 3600 rpm, with a maximum torque rating of 2100 ft/lbs (2851 Nm). With max torque at 0-1000 rpm, the versatile dynamometer can check torque rise or lugging ability of high torque/low RPM engines or motors.

a

 Fitted with a balanced high speed driveline kit. A universal adaptor for diesel or Timesaver adaptor for electric
a Protection is built-in against harmonic vibration, torque overload and thermal overload.
a Bi-rotational - can test equally in either rotation
a NEW DynoPro 2100S power-torque computer & printer
a Calibration is an easy one man operation done on site (no need to send away)
a Unit is portable & on wheels - weighing 585 kg after draining water ballast (300 litre water ballast also used as cooling reserve). Floor or rail mounted optional.
a The I-600 can test diesel engines, electric motors, gear boxes, transmissions and other high torque/low RPM applications. Other options permit custom-tailoring of the I-600 to your application. In addition, the I-600 can be factory equipped to test unusually high torque/low RPM equipment
No noise, the only sound you will hear is that of the engine being tested!
Power Ratings
Model Max Speed 900 RPM 1200 RPM 1800 RPM 3600 RPM Max Torque
I-600 3600 RPM 28 - 350 HP
21 - 260 kW		 35 - 400 HP
24 - 300 kW		 55 - 450 HP
37 - 335 kW		 150 - 600 HP
110 - 450 kW		 2100 ft/lb
2800 Nm

Note: Minimum ratings relate to an estimate of water drag on drums

View  -  Power Graph & Torque Graph

NEW  DynoPro 2100S Computer & Printer
 Displays power, torque and torque rise with easy calibration
Displays imperial (hp ft/lbs) or metric (kW Nm) through a simple touch menu setup.
Printer & ETS software for external computer such as laptop available.
Optional
RTX Handheld Remote with CLControl
Manual control & Closed Loop Control with Set-Point ability for RPM or torque. Real time data display..

DIESEL ENGINE TEST OPTIONS

AW Engine Test System (ETS)
Computer software that enables reports,
graphs and full test data. Connects directly
from the dyno's digital display to an external
PC (ie. laptop)

Ideal for Ag or Diesel engine

Engine Cooling Manifold
uses the pre-heated water from
dyno or external source in replace
of radiator

Engine Stand
with bell housing mount
or pad mount
(4000 kg capacity)

ELECTRIC MOTOR OPTIONS


Electric Motor Testing Package
Motor test table - mobile & adjustable height - suit up to 450mm frame size
Special Dyno Floor mount kit - set up to attach test table
Constant Torque Kit - to 0 rpm for locked rotor test or very low rpm testing, eg: tranmissions
CLControl - set point torque or rpm operated from hand held control with test display (6m lead)
 More Pictures

JETest Software Hardware Report Package
 Sophisticated system specifically for electric motors

AC Low Voltage, AC High Voltage & DC Packages.
Combination packages (any or all of above)
Temperature & Vibration packages
Data Management packages

More info
COOLING REQUIREMENT GUIDE
Litres per Minute Required - for continuous testing

Incoming
water temp

 100HP
75kW		 200HP
 150kW		 300HP
225kW		 400HP
300kW		 500HP
375kW		 600HP
450kW		 700HP
525kW		 800HP
600kW		 900HP
675kW		 1000HP
 750kW
40oF    5oC 19 38 57 75 95 115 135 150 170 190
50oF    11oC 23 45 70 90 115 140 160 185 205 230
60oF    16oC 27 54 80 105 135 160 190 215 245 270
70oF    22oC 30 60 90 120 150 180 210 240 270 300
80oF    27oC 36 70 100 135 170 200 240 270 305 340
90oF    33oC 40 80 115 150 190 230 265 300 340 380
100oF   38oC 52 100 150 200 250 300 350 400 450 500
110oF   44oC 68 130 195 260 325 390 455 520 585 650


Please note: Due to ongoing developments specifications may change.

A.M.D.S. has full Technical Information, Parts & Service backup ensuring AW owners receive the service they deserve
 A.M.D.S. is the distributor for the Australia - New Zealand region

Australasian Machinery Dealer Services Pty Ltd
 A.C.N. 111 546 082
Chris Smith  - Tony Newman
 Australia Ph: (02) 6921 2011     International Tel: + 61 2 6921 2011
Email: dyno@amds.com.au    or     dyno@amds.co.nz
Website: www.dynamometer.com.au    www.amds.com.au    www.amds.co.nz

PRINTABLE BROCHURE  -  CLICK HERE

 Full AW Model Range

 Home

 Go Back