PARTS CLEANING SYSTEM

Are you wasting valuable man hours?

  

Simply load the machine, set the timer & walk away
 The Apollo Spray Wash uses it's own tank of hot water, bio-degradable detergent & inhibitor with the combination of a revolving
basket & high pressure jets providing an economical environmentally friendly alternative to the drudgery of hand cleaning
800 - 400 kg load  -  800mm water drive basket turntable


800 model with lid open                                      800 model lid shut

 Uses only hot water & detergent
Low running costs
Electric wash cycle timer
Water driven basket turntable
Mobile - wheel to the job
Simple function
Easy to clean tank with auto pump out
Environmentally friendly

Maximum cleaning efficiency

Excellence in design and quality.
Easily the best value washer on the market today,
combined with full after sales service.
Don't settle for anything less!

How much skilled workshop time is spent hand cleaning parts each day!
You may well be wasting valuable resources.


Parts basket inside machine

APOLLO SW800 SPECIFICATIONS


Rear of machine showing pump & pump out facility

Basket Diameter 800mm
Job Weight (Maximum) 400kg
Spray Bar Height 470mm
Loading Lip Height 770mm
Water Tank Capacity 120 Litres
Power Requirement 20 amp - 3 Phase
Pump (350 Litre/min) 2.2kW - 3 Phase
Pump Pressure 250 kpa
Water Heaters (Temp) 3 x 2.4kW (80oC)
Machine Height 1120mm
Machine Width 1170mm
Machine Depth (length) 1250mm
Machine Weight 340kg
  • The basket turntable is water driven from the supply to the spray bar. The basket rotates on a heavy duty stub axle using tapered roller bearings.
  • One-piece closed loop fixed spray bar design gives maximum cleaning efficiency. The spray bar has no joints or hoses to fail. Spray bar has a flushing valve to allow simple cleaning of any spray hole blockages.
  • Easy clean 120L chemical tank has two lids for full access. Large capacity, easy clean gasket & particle strainers lift out with tank lids. Strainers have smaller holes than the spray bar to minimise blockages.
  • A one-piece lid labyrinth seal area does not require a gasket or latch. There are no welded metal joints to rust.
  • Gas strut assisted lid lift allows one-handed operation
  • A safety switch shuts off the pump when lid is lifted.
  • Electronic wash timer optimises the cleaning cycle time & reduces power costs.
  • Water temp is thermostat controlled at 80oC, turn on about 30 min before use. Element protection thermostat cuts power to the elements when water level is low (Water level controlled manually)
  • Auto pump out feature allows water to be pumped out in minutes for periodic machine tank cleaning.
  • Heavy duty Australian made pump is located so that the pump seal can be serviced without removal of motor. Pump overload protection fitted.
  • Long life industrial two pack painted finish minimises paint flaking & rusting.
  • Mobility handle allows the machine to be moved to service area.
  • Small parts container for nuts & bolts, etc


Control Panel


Flushing valve for after jet cleaning


Basket easily  lifted & secured  for cleaning

Australasian Machinery Dealer Services Pty Ltd
 A.C.N. 111 546 082
PO Box 1050, Wagga Wagga NSW 2650
Contact: Chris Smith
Ph: 02 6921 2011     (+ 61 2 6921 2011)
Website www.amds.com.au  or  www.spraywash.com.au  Email: office@amds.com.au


 

Please note: Due to ongoing developments specifications may change.

PRINTABLE BROCHURE  -  CLICK HERE

   

 Home

 Go Back