|
PARTS CLEANING SYSTEM
|
|
Are you wasting valuable man hours? |
 |
|
|
Simply load the machine,
set the timer & walk away
The
Apollo Spray Wash uses it's own tank of hot water,
bio-degradable detergent & inhibitor
with the combination of a revolving
basket & high pressure jets
providing an
economical environmentally friendly alternative to the drudgery of hand
cleaning |
1612
-
2
tonne load -
1600mm gear drive turntable
Large capacity
extra
heavy duty spray wash
|
|
Maximum cleaning
efficiency |
Picture of 1409 used for
illustration purposes only!
|
|
Uses only hot water &
detergent |
|
Low running costs |
|
Electric wash cycle timer |
|
Electric motor driven
turntable |
|
Auto water level top up |
|
7 day
clock for heating elements |
|
Easy to clean tank with
auto pump out |
|
Environmentally friendly |
|
How much
skilled workshop time is spent hand cleaning parts each day!
You may well be wasting valuable resources.
Solvent cleaners can be damaging to both your employees health and the
environment.
The Apollo spray wash uses only water & bio-degradable
detergent providing an economical environmentally friendly alternative to
the drudgery of hand cleaning |
|
APOLLO SW1612 SPECIFICATIONS |
|
Basket Diameter |
1600mm |
|
Job Weight (Maximum) |
2000kg |
|
Spray Bar
Height |
1200mm |
|
Loading Lip Height
|
550mm |
|
Water Tank Capacity |
400 Litres |
|
Power Requirement |
32 amp - 3 Phase |
|
Pump (350 Litre/min) |
5.5 kW 3 Phase |
|
Pump Pressure |
425 kpa (60 psi) |
|
Water Heaters (Temp) |
3 x 3.6kW (80oC) |
|
Machine Height |
2100mm |
|
Machine Width |
2280mm |
|
Machine Depth (length) |
2300mm |
|
Machine Weight |
1250kg |
|
Picture of 1409 used for
illustration purposes only!
|
|
The cabinet door
opens ton 90 degrees and allows excellent access for loading & unloading
of large work pieces.
The turntable is electric motor gearbox driven at
4 rpm, eliminating dangerous over speeding
experienced with large water drive turntables.
60% more water is available for cleaning as
water is no longer required to drive the turntable. The
turntable rotates on a heavy duty stub axle using tapered roller bearings.
The engineer designed
fixed spray bar design gives maximum
cleaning efficiency. 42 x 3mm wash jets are used. The spray bar has no
joints or hoses to fail. Spray bar has
2
flushing valves
to allow simple cleaning of any spray hole blockages.
Easy clean 300L chemical tank has two
lids for full access. Large capacity easy clean gasket & particle
strainers lift out with tank lids. Strainers have smaller holes than the
spray bar to minimise blockages.
Insulated cabinet & door ensures
high efficiency & low running costs.
A safety switch shuts off the pump when door is opened.
Electronic wash timer optimises the cleaning cycle time & reduces power
costs.
Auto water level control
with mains connection (also provides heating element protection). Water
temp is thermostat controlled at 80oC
& connected to 7 day
timer.
Auto pump out feature allows water to be pumped
out in minutes up to 50 metres for periodic machine tank cleaning.
Heavy duty Australian
made pump is located so that pump seal can be serviced without removal of
motor. Pump overload protection fitted.
Long
life industrial two pack painted finish minimises paint flaking & rusting.
Small parts container for
nuts & bolts, etc
|
