PARTS CLEANING SYSTEM

Are you wasting valuable man hours?

 

Simply load the machine, set the timer & walk away
 The Apollo Spray Wash uses it's own tank of hot water, bio-degradable detergent & inhibitor with the combination of a revolving
basket & high pressure jets providing an economical environmentally friendly alternative to the drudgery of hand cleaning

1409 -  1.2 tonne load  -  1400mm gear drive turntable
Large capacity
extra heavy duty spray wash
Maximum cleaning efficiency

Uses only hot water & detergent
Low running costs
Electric wash cycle timer
Electric motor driven turntable
Auto water level top up
7 day clock for heating elements
Easy to clean tank with auto pump out
Environmentally friendly

How much skilled workshop time is spent hand cleaning parts each day!
You may well be wasting valuable resources.

Solvent cleaners can be damaging to both your employees health and the environment.
The Apollo spray wash uses only water & bio-degradable detergent providing an economical environmentally friendly alternative to the drudgery of hand cleaning

APOLLO SW1409 SPECIFICATIONS

Basket Diameter 1400mm
Job Weight (Maximum) 1200kg
Spray Bar Height 900mm
Loading Lip Height 550mm
Water Tank Capacity 300 Litres
Power Requirement 32 amp - 3 Phase
Pump (350 Litre/min) 5.5 kW 3 Phase
Pump Pressure 425 kpa (60 psi)
Water Heaters (Temp) 3 x 3.6kW (80oC)
Machine Height 1900mm
Machine Width 1900mm
Machine Depth (length) 1950mm
Machine Weight 1100kg

The cabinet door opens ton 90 degrees and allows excellent access for loading & unloading of large work pieces.
The turntable is electric motor gearbox driven at 4 rpm, eliminating dangerous over speeding experienced with large water drive turntables. 60% more water is available for cleaning as water is no longer required to drive the turntable. The turntable rotates on a heavy duty stub axle using tapered roller bearings.
The engineer designed fixed spray bar design gives maximum cleaning efficiency. 42 x 3mm wash jets are used. The spray bar has no joints or hoses to fail. Spray bar has 2 flushing valves to allow simple cleaning of any spray hole blockages.
Easy clean 300L chemical tank has two lids for full access. Large capacity easy clean gasket & particle strainers lift out with tank lids. Strainers have smaller holes than the spray bar to minimise blockages.
Insulated cabinet & door ensures high efficiency & low running costs.
A safety switch shuts off the pump when door is opened.

Electronic wash timer optimises the cleaning cycle time & reduces power costs.

Auto water level control with mains connection (also provides heating element protection). Water temp is thermostat controlled at 80oC & connected to 7 day timer.
Auto pump out feature allows water to be pumped out in minutes up to 50 metres for periodic machine tank cleaning.
Heavy duty Australian made pump is located so that pump seal can be serviced without removal of motor. Pump overload protection fitted.
Long life industrial two pack painted finish minimises paint flaking & rusting.
Small parts container for nuts & bolts, etc
 

Australasian Machinery Dealer Services Pty Ltd
A.C.N. 111 546 082
PO Box 1050, Wagga Wagga NSW 2650
Contact: Chris Smith

Ph: 02 6921 2011     (+ 61 2 6921 2011)

Website www.amds.com.au  or  www.spraywash.com.au  Email: office@amds.com.au

Please note: Due to ongoing developments specifications may change.

PRINTABLE BROCHURE  -  CLICK HERE

   

 Home

 Go Back